Tri-spark’s high performance sequential firing system is a high precision system with built in self test button, tailored exclusively for the Triumph Trident, BSA Rocket Three, T160 and Hurricane machines. Compact design with no additional black box.
Compatible with cylindrical 12 volt coils (6 volt coils if a ballast resistor is fitted). Not to be used with miniature coils.
The key to over-coming ignition problems during starting is sequential firing, this is not a wasted spark system. All the spark energy is focused on one cylinder at a time resulting in superior all round performance and reduced current drain, which is all important for ensuring a quick and clean engine start.
Preferred system for highest performance.
- 12V Tri-Spark high performance coils – 3 required. Our P/N: HTC54 (IGC-1012)
- Spark plug lead & NGK 5k suppressor caps (3 required). Our P/N: LB05F
Non preferred option 6-volt coils
While there is no need to change this system which was used with the Rita ignition and gives acceptable results, it has a lower performance than 12 volt coils. Requires:
- Ballast resistor. P/N BALRES-1
- 6-volt coils. HTC53
- Spark plug lead & NGK 5k suppressor caps (3 required). P/N: LB05F
If starting performance is of primary concern, choose the 12 volt HT coil option.
Customers requiring the very highest quality should only consider Tri-spark HT coils and NGK products with Tri-spark ignition systems. Our technical team can assist in the selection of the proper parts, leads and connectors. We also stock high grade NGK Iridium spark plugs.
PVL cannister type coils are a slighter cheaper alternative and give nearly the same results. The Lucas cannister coils are a great everyday coil but are out performed in every department, but nonetheless can be considered a great budget option.
We also have our own range of Japanese type HT coils with single or dual HT leads that will give very satisfactory results.