Honda XL250 XL500 12 Volt Conversion


Out of stock

Part Number: 12VC-XL1 Category: Tags: , , ,

Product Downloads


Skilled and indepth strip down, modification and assembly of the generator by a competent person required.

12 volt conversion for the Honda 6 volt Honda XL250 and 500 models with CDi ignition. The generator must be fitted with the supplied lighting coil then  re-configured. After, the single single 12 volt regulator is  wired in to the loom. The wiring part we have made easy.

Please read the fitting guide and determine if the work is within your ability. Serious damage can occur if the generator is incorrectly assembled.

Wiring is simple and there is a picturial guide. Only a minimal amount wiring is needed and there are no changes to the wiring loom or switches.

In addition you will need 12 volt bulbs, you can supply these yourself or buy them in a handy ‘Accessory Pack’ see below.

The full description and fitting guide can be downloaded from the link above.

Our workshops can reconfigure the generator if it is sent in, leaving the simple wiring changes.

Additional Information

Weight0.5 kg
Country Of Origin

You may also like…