Lucas E3AR, 6 volt dynamo overhaul kit for dynamos; 20017A/B, 200430, 200122, 200120, 200278 & 200364.
UK made on original Lucas tooling. Armature threaded, tapered shaft, 157mm long, single keyway, original P/N 200370.
Supplied with the correct magneto type bearings (the more common seal type shown)
6 volt armature p/n 2003770, tapered, 157mm, single keyway (UK)
6 volt field winding (UK)
Brush set (UK)
Magneto type drive end bearing LU189289 (EU)
Magneto type commutator bearing LU189284 (EU)
1 x Pole shoe screw (UK)
Reproduction of Lucas dynamo service book (for the E3L &E3N dynamos but still useful reference).
We have a great deal of experience with dynamos. For trouble free 6 or 12 volt operation with good output and without causing the armature to over-heat we recommend our UK made, solid state regulators for positive or negative earth machines. These can be swapped from 6 to 12 volts so you only need to chose the correct earth polarity.
Fitted to many models so check your manual and the armature in the picture.